Green Stamp Insulation - Spray Foam and Other Insulations

Tel #: (781) 899-3618   Fax #: (781) 547-5659

We Are The Building envelope specialists

The Building Envelope Specialists

Blower Door Testing Experts

Greenstamp Co., was founded on building envelope sciences. We focus on the building envelope (outer walls, floor, ceiling or roof) as part of the energy efficiency equation. Our goal is to create an exact balance of how a heating/cooling system conditions the air and how the house uses (or wastes) the conditioned air.

We use blower door testing to measure a building or home’s “airtightness” and to locate air leakage sites. The blower door test is a proven, objective means to identify air leaks in a home. It removes the guesswork of weatherizing and improving a building’s efficiency and comfort.


 

 

 

 

 

 

 

 

 

 

 


US Green Building Council and Energy Star

 

 

 

 

 

Our Blower Door Testing Process

To conduct the blower door test, GreenStamp technicians close all openings within the house. We then attach a special, calibrated fan within the frame of an exterior-door. The fan pulls air from the house and gauges measure the air flow through the fan. Other gauges measure the difference between indoor and outdoor air pressures. To calculate the leakage rate, we adjust the fan to maintain a constant pressure differential.

The number of air changes per hour (the complete replacement of the indoor air volume in an hour) at a standard pressure differential (pressure inside the house minus pressure outside the house, measured in Pascals) tells us how the house is performing. Five air changes per hour at 50 Pascals differential pressure (5 ACH50) is a reasonable performance standard.

During the test, outdoor pressure forces air through openings in the building envelope. Often, it is easy to feel these leaks with bare hands. Other times, we use a smoke pencil or infrared light to detect where cooler air is seeping into the house.

Once the leaks are found, we can recommend the most cost-effective means for sealing them.

Based on our free inspection of your project, we will help you determine the best and most cost-effective solution.

To Learn More About Our Blower Door Testing

PLEASE CALL (781) 899-3618

BPI Accredited